Log in to the iServer service management server, and click Data->Data Registration. Enter to the register datastore page (http://{ip}:{port}/iserver/admin-ui/data/dataRegistration), which shows all registered data stores, and click "Store ID" to view detailed storage configuration information. On the data storage page, click Register Datastore button to add new data storage. Since the parameters required to register different databases are different, the configuration information of different databases is described in detail below.

Register the PostGIS database

When registering PostGIS, you need to fill in or select the following parameters:

• Storage ID: User-defined storage ID name, a unique identifier created for the database
• Data store type: Select "Spatial Database".
• Enginetype: Select "POSTGIS"
• Service address: Fill in the database service address in the format of {ip}:{port}
• Name: Fill in the name to be used
• User Name: The user name of the database owner
• Password: The password of the owner of the database
• Editable: Set whether it is editable or not. It is not editable by default.
• Check Editable: This database can be used as a storage node for the directory service to upload relational data. As a storage node for uploaded relational data, follow these guidelines:
• When multiple editable databases are registered, the database with the fewest data sets is preferred as the storage node.
• When the editable database and iServer DataStore are registered at the same time, the editable database is preferred as the storage node, and the principle of minimum data set is followed.
• If only the iServer DataStore is registered, the iServer DataStore is available as a storage node.
• Uncheck Editable: The database cannot be used as a storage node for directory service uploading relational data.

Click the Register DataStore button to complete the registration.

Register for OraclePlus

The following parameters need to be filled in or selected when registering OraclePlus:

• Storage ID: User-defined storage ID name, a unique identifier created for the database
• Data store type: Select "Spatial Database".
• Enginetype: Select "ORACLEPLUS"
• Service address: Database service address in the format of {ip}:{port}/orcl
• Name: Fill in the name to be used
• User Name: The user name of the database owner
• Password: The password of the database owner

Click the Register DataStore button to complete the registration.

Register the PostgreSQL database

PostgreSQL is a free object-relational database server (database management system) distributed under a flexible BSD-style license. It supports most of it SQL is standard and provides many other modern features: complex queries, foreign keys, transaction integrity, etc. The parameters to be filled in or selected when registering PostgreSQL are as follows:

• Storage ID: User-defined storage ID name, a unique identifier created for the database
• Data store type: Select "Spatial Database".
• Enginetype: Select "POSTGRESQL"
• Service address: database service address in the format of {ip}:{port}, such as "192.168.112.162: 5432"
• Database: Fill in the name to be used
• Name: Fill in the name to be used
• User Name: The user name of the database owner
• Password: The password of the database owner
• Check Editable: This database can be used as a storage node for the directory service to upload relational data. As a storage node for uploaded relational data, follow these guidelines:
• When multiple editable databases are registered, the database with the fewest data sets is preferred as the storage node.
• When the editable database and iServer DataStore are registered at the same time, the editable database is preferred as the storage node, and the principle of minimum data set is followed.
• If only the iServer DataStore is registered, the iServer DataStore is available as a storage node.
• Uncheck Editable: The database cannot be used as a storage node for directory service uploading relational data.

Click the Register DataStore button to complete the registration.

Register for HDFS

iServer supports registering HDFS directory as spatial database. When registering HDFS, you need to fill in or select the following parameters:

• Storage ID: User-defined storage ID name, a unique identifier created for the database
• Data store type: Select "Spatial Database".
• Enginetype: Select "HDFS"
• Service address: fill in the database service address in the format of hdfs://{ip}:{port}/data
• Kerberos authentication enabled: Set whether Kerberos authentication is enabled, if you need to register Kerberos enabled For certified HDFS, you need to check "HBase Cluster Has Kerberos Authentication Turn On" and enter the following parameters:
• Hadoop Cluster Core-site.xml File Path: The path of the Hadoop cluster configuration file core-site.xml in the iServer host.
• HDFS Cluster Hdfs-site.xml File Path: Fill in the configuration file HDFS-site.xml path of the HDFS cluster on the iServer host
• Kerberos Client Config File Path: Fill in the path of the configuration file krb5.ini for the Kerberos client in the iServer host
• Principle Name: Fill in the Kerberos subject name
• Principle Keytable Path: Fill in the path of the Kerberos key file
• Jaas Config File Path: Fill in the path of the jaas.exe configuration file
• Editable: whether it is editable or not. It is not editable by default.
• Check Editable: This database can be used as a storage node for the directory service to upload relational data. As a storage node for uploaded relational data, follow these guidelines:
• When multiple editable databases are registered, the database with the fewest data sets is preferred as the storage node.
• When the editable database and iServer DataStore are registered at the same time, the editable database is preferred as the storage node, and the principle of minimum data set is followed.
• If only the iServer DataStore is registered, the iServer DataStore is available as a storage node.
• Uncheck Editable: The database cannot be used as a storage node for directory service uploading relational data.

Click the Register DataStore button to complete the registration.

Register DM

Fill in or select the following parameters when registering DM:

• Storage ID: User-defined storage ID name, a unique identifier created for the database
• Data store type: Select "Spatial Database".
• Enginetype: Select "DM"
• Service address: fill in the database service address in the format of {ip}:{port}
• Name: Fill in the name to be used
• User Name: The user name of the database owner
• Password: The password of the database owner
• Editable: Set whether it is editable or not. It is not editable by default.
• Check Editable: This database can be used as a storage node for the directory service to upload relational data. As a storage node for uploaded relational data, follow these guidelines:
• When multiple editable databases are registered, the database with the fewest data sets is preferred as the storage node.
• When the editable database and iServer DataStore are registered at the same time, the editable database is preferred as the storage node, and the principle of minimum data set is followed.
• If only the iServer DataStore is registered, the iServer DataStore is available as a storage node.
• Uncheck Editable: The database cannot be used as a storage node for directory service uploading relational data.

Click the Register DataStore button to complete the registration.

Register HIGHGODB

The following parameters need to be filled in or selected when registering HIGHGODB:

• Storage ID: User-defined storage ID name, a unique identifier created for the database
• Data store type: Select "Spatial Database".
• Enginetype: select "HIGHGODB"
• Service address: fill in the database service address in the format of {ip}:{port}
• Name: Fill in the name to be used
• User Name: The user name of the database owner
• Password: The password of the database owner
• Editable: Set whether it is editable or not. It is not editable by default.
• Check Editable: This database can be used as a storage node for the directory service to upload relational data. As a storage node for uploaded relational data, follow these guidelines:
• When multiple editable databases are registered, the database with the fewest data sets is preferred as the storage node.
• When the editable database and iServer DataStore are registered at the same time, the editable database is preferred as the storage node, and the principle of minimum data set is followed.
• If only the iServer DataStore is registered, the iServer DataStore is available as a storage node.
• Uncheck Editable: The database cannot be used as a storage node for directory service uploading relational data.

Click the Register DataStore button to complete the registration.

Register Yukon

The following parameters need to be filled in or selected when registering Yukon:

• Storage ID: User-defined storage ID name, a unique identifier created for the database
• Data store type: Select "Spatial Database".
• Enginetype: select "Yukon"
• Service address: fill in the database service address in the format of {ip}:{port}
• Name: Fill in the name to be used
• User Name: The user name of the database owner
• Password: The password of the database owner
• Editable: Set whether it is editable or not. It is not editable by default.
• Check Editable: This database can be used as a storage node for the directory service to upload relational data. As a storage node for uploaded relational data, follow these guidelines:
• When multiple editable databases are registered, the database with the fewest data sets is preferred as the storage node.
• When the editable database and iServer DataStore are registered at the same time, the editable database is preferred as the storage node, and the principle of minimum data set is followed.
• If only the iServer DataStore is registered, the iServer DataStore is available as a storage node.
• Uncheck Editable: The database cannot be used as a storage node for directory service uploading relational data.

Click the Register DataStore button to complete the registration.

Register Vastbase

The following parameters need to be filled in or selected when registering Vastbase:

• Storage ID: User-defined storage ID name, a unique identifier created for the database
• Data store type: Select "Spatial Database".
• Enginetype: select "Vastbase"
• Service address: fill in the database service address in the format of {ip}:{port}
• Name: Fill in the name to be used
• User Name: The user name of the database owner
• Password: The password of the database owner
• Editable: Set whether it is editable or not. It is not editable by default.
• Check Editable: This database can be used as a storage node for the directory service to upload relational data. As a storage node for uploaded relational data, follow these guidelines:
• When multiple editable databases are registered, the database with the fewest data sets is preferred as the storage node.
• When the editable database and iServer DataStore are registered at the same time, the editable database is preferred as the storage node, and the principle of minimum data set is followed.
• If only the iServer DataStore is registered, the iServer DataStore is available as a storage node.
• Uncheck Editable: The database cannot be used as a storage node for directory service uploading relational data.

Click the Register DataStore button to complete the registration.